Easily calculate the Field of View (FOV) for your thermal imaging camera based on the camera resolution and lens specifications. This tool helps determine the Horizontal, Vertical, and Diagonal FOV, along with the Instantaneous Field of View (IFOV) per pixel. It’s ideal for understanding your camera’s coverage area and optimizing system design for surveillance, inspection, or other thermal imaging applications.

Simply input your camera’s resolution and lens FOV, and get precise angular measurements to support accurate distance estimation and scene planning.

To convert the permeability rate from cubic feet per minute per square foot (CFM/ft²) to cubic meters per hour per square meter (m³/h/m²), you can use the following conversions:

Vapor permeable and vapor barrier materials are crucial in the construction of buildings for managing moisture content and ensuring the durability and comfort of the indoor environment:

1. Vapor Permeable Materials: These materials allow water vapor to pass through them. Used in the right places, they help manage moisture by allowing walls to “breathe.” This is particularly important in climates where buildings are susceptible to accumulating moisture within the wall assemblies. If the moisture cannot escape, it can lead to mold growth, wood rot, and reduced effectiveness of insulation materials. Examples of vapor-permeable materials include certain types of house wraps, building papers, and some specialized sheathings.

2. Vapor Barriers: Also known as vapor diffusion retarders, these materials are designed to prevent the transmission of water vapor. In cold climates, placing a vapor barrier on the warm side of insulation is essential to prevent moisture from condensing inside the wall cavity when it hits the cold outside air. If the moisture were allowed to accumulate, it could damage the structure and insulation, and potentially lead to mold and mildew issues. Common vapor barrier materials include polyethylene plastic sheeting and vapor-retardant paints.

The correct use of these materials varies based on climate, the construction of the building, and local building codes. A balance between vapor permeability and vapor resistance is often required to manage moisture effectively while maintaining the energy efficiency of the building. In some cases, materials that are semi-permeable may be used to strike a balance between allowing some drying of the building assembly while blocking most of the vapor transmission.

It is crucial to understand that the same material can act differently in varied climates. For instance, what serves as a necessary vapor barrier in a cold climate could potentially trap moisture in a wall system in a hot, humid climate. Consequently, local climate conditions are a key determinant in the selection and placement of these materials.

If the product of the temperature differential across the building envelope (ΔT), multiplied by the building height (m) is greater than 250 m·°C, it is likely that the stack pressure is too great to maintain an equal pressure difference across the whole of the building envelope.

Credit to Retrotec for the initial work on this calculator.
Any assumptions made are listed below in the assumptions box.