The Efficiency Window & Door Seal allows easy retrofit to draught-proof windows and doors.  This product comes in brown, white and clear,  and is capable of closing up gaps 2mm – 10mm in size.

Benefits of our seal over other foam seals on the market.

• Closes a wider range of gap
• Does not hamper the door from closing and opening
• Its cheaper than other products
• Outlasts other door seals, that begin to crumble over a short period of time.
• Flexible options to blend in with doors and windows. Brown and white, or just plain see through.

It comes in roles of 50m and 20m. Contact Efficiency Matrix to purchase large quantities, or visit our store.

Colour	Width installed	Model No	Gap Size
Brown	11.75	EMSealB	2mm - 8mm
White	11.75	EMSealW	2mm - 8mm

Due to our buildings constantly moving and our doors and windows being exposed to the elements, nothing ever stays the same shape.  Door seals need to be long lasting, and extremely flexible on the size of gap they can close.

Take a look at our door seals, you’ll never go back to using ordinary foam or brush door seals again…

 

Small Basic Mitt for Fire Rating Spitfires and Sensors

Fire rating and sound proofing small ceiling penetrations in commercial and residential buildings is no longer a problem, with the Small Mitt.  Providing a fire rating up to 2 hours, the Small basic Mitt fits snugly up a cut out hole as little as 50mm, quickly and efficiently fire rating penetrations in a ceiling with minimal fuss from below.  The Small Basic Mitt is not recommended for use with high output 70mm Cutout LED Downlights.  For further information please go to our support page.  Contact us for pricing and stock availability.

Can be used with:

• Small emergency lighting (Spitfires)
• Sensor penetrations
• up to 5 watt LED lighting
• Other small ceiling penetration services

 

 

 

Speaker Mitt In-ceiling Speaker Cover

The Speaker Mitt In-ceiling Speaker Cover is designed for an install from below the ceiling for speakers that are  smaller than 280mm in width.  Our material is sound proof and is the perfect product for stopping any noise entering other rooms while also directing sound downwards rather than in to the roof space.  As an added benefit, insulation can also completely submerge the Speaker cover enabling insulation consistency throughout your entire building envelope.

This is an extremely high quality product.  Our goal at Efficiency Matrix is to enable the continuation of a building material (like insulation) over devices like in-ceiling speakers, which are half in a climate controlled living space, and half in an area which is exposed to the elements.

For any information regarding the purchase of this product please contact us via the contact us form on our website.

Refer to our support page for dimensions and Sound proofing testing page

Click here for the Speaker Mitt Brochure

Refer to our Video’s for a sound proofing demonstration.

 

Loft Mitt Cover for In ceiling Speakers and Downlights enabling fire Ratings and sound proofing, with energy efficiency.

A retrofit solution, installable from above or below the ceiling up a 95mm cut out and complying with AS/NZS 5110 with an LED!

The Ultimate balanced solution allowing a larger heat dissipation area with an install from below the ceiling.

IMPORTANT! There maybe other cheaper barrier products on the market, but they may not comply to AS/NZS 5110 Barrier Standard, they also need to be assembled on site and they normally do not have a place to cable tie control gear..  Be sure to check that you are comparing our product with a Cover that complies to the barrier standard called up by AS/NZS 60598.

Here is an example of how our Loft Mitt downlight cover product performs with the use of Thermal Imaging.  Comparing the insulative qualities of our product compared to an Earthwool R3.5 Insulation Batt.  Downlights were not turned on for 24 hours to produce this image. Outside temperature was 10˚C and inside air was 23.6˚C.  Our Downlight covers make a weak point of the building envelope into a strong point, improving the effectiveness of the over all R-value of your insulation.  All this with a 10 Year Warranty.

 5% Gaps in insulation can equate to a 30% reduction in insulation effectiveness

Plastic, Cardboard and Metal Downlight covers just don’t cut it!

Key Features of this product are:

1. It complies to AS/NZS 5110 with a combination LED Fitting or LED control gear.
2. It includes a transformer holder
3. It is made of a proven insulative material
4. It provides sound proofing
5. It has a Fire Rating up to 2 hours (the material expands towards a fire)
6. It helps eliminate the Draught Effect
7. It is installable from below the ceiling up a 95mm hole
8. 10 Year Warranty, with a single installation from below the ceiling.

Product Description

Being a cover that includes an R-value, unlike other downlight covers, this cover is restricted to only be compatible with  LED lighting of wattage up to 20w to ensure a long lamp life.  Other downlight covers on the market are not restricted but are also not insulative.

The Loft Mitt is an Insulation installers’ best friend, passing stringent standards with ease and enabling energy efficiency with its R-value and draft proofing of recessed light fittings or In-ceiling speakers. Primarily a cover that is installed from above the ceiling, this Cover can also be installed from below the ceiling up a 95mm hole, recessed lighting fitting or in-ceiling Speaker. This is the largest downlight cover in the family enabling quick and easy installation over LED fittings. The Downlight cover is made of an insulative, sound proofing and up to 2 hour fire rated material, allowing the installer to have piece of mind for safety with lighting and sound performance/proofing for in-ceiling speakers.

Have a look at the product Specs for the dimensions of this cover compared to others in the family for compatibility with fittings or in-ceiling speakers.  Also take a look at our test reports for this cover on the right hand side of this page.

This cover enables insulation to be installed all over the Lighting fitting/in-ceiling speaker to enable, fire rating, sound proofing and energy efficiency for heating and cooling no matter whether you have batts or blow in insulation.

Refer to Specifications for Loft Mitt installation Recommendations.