While everyone is focused on energy efficiency of the globe, we focus on fixing insulation and reducing air leakage inefficiencies from recessed or downlight lighting. Installable from below the ceiling, this product is only usable with selected LED Downlight Fittings (recommended wattage of up to 10-13W). The Downlight Mitt (in combination with a supported LED product), provides a significant improvement in the efficiency of Australian homes, as well as being installable from below the ceiling. 10 Year Warranty when installed once from below the ceiling!
IMPORTANT! There maybe other cheaper products on the market, but they may not comply to AS/NZS 5110 Barrier Standard. Be sure to check that you are comparing our product with a Cover that complies to the barrier standard called up by AS/NZS 60598.
- Find out more about the barrier standard
- Find out more about Comparing the barrier standard to LED Downlight IC Ratings
- Find out about Sound Proofing of downlights
Product Description
The Downlight Mitt is a non-ventilated downlight cover product which focuses on fixing the building performance inefficiencies of Downlights.
- Sound Proofing
- Fire Ratings
- Insulation consistency
- Draught proofing
T
he Downlight Mitt is made out of an intumescent/insulative material taking downlight safety to a new level, while also providing an R-value of 0.5 above the luminaire. This Downlight Mitt product is designed primarily for LED fittings with LED driver/control gear. Installation of the Downlight Mitt can be done from above or below the Ceiling. Mastic should be used when installing from above, to create a more air tight seal.
When installed from below it produces an up to 2 hour fire rating Complying with Standard AS 1530 Part 4
The Downlight Mitt is designed to change the general operation of a Downlight, to fix draughts, R-value consistency of insulation and Energy efficiency of Downlighting. Its a building envelope extension product.
We can supply our products overseas, USA, Europe, Asia, Australasia. Contact us for costs.
Visit our LED recessed lighting support page for dimensions of our products and compatible products
Refer to Specifications for the Downlight Mitt installation Recommendations.
